Press Release from PEAK-System Technik GmbH, Darmstadt, Germany, August 2012
============================================================================

PCAN-PCI Express - Four-channel CAN Interface for PCI Express


PEAK-System presents a new hardware design of the CAN interface for PCI Express. The PCAN-PCI Express card is available as a single, dual, and for the first time as a four-channel version. All cards have a galvanic isolation of up to 500 Volts, separately for each CAN port. For the operation of external devices a 5-Volt supply can optionally be routed to pin 1 of the CAN connector by setting solder bridges on the PCAN-PCI Express card, independently for each CAN port.

The CAN bus connection is based on an FPGA implementation of an NXP SJA1000 CAN-compatible controller and the NXP CAN transceiver PCA82C251. The card offers a High-speed CAN transmission according to the CAN specification ISO 11898-2.

Like all CAN interfaces of the PCAN series, the PCAN-PCI Express comes with the CAN monitor PCAN-View for Windows and the programming interface PCAN-Basic. Device drivers are available for Windows 7/Vista/XP and Linux, each in 32-bit and 64-bit editions. 


Contact:
PEAK-System Technik GmbH
Otto-Roehm-Strasse 69
64293 Darmstadt
Germany

Phone: +49 (0)6151 8173-20
Fax:   +49 (0)6151 8173-29

E-mail: info@peak-system.com
Web: www.peak-system.com






