Press Release by PEAK-System Technik GmbH, Darmstadt, Germany, August 2012
==========================================================================

PCAN-CCP API and PCAN-XCP API
Programming Interfaces for the Communication with ECUs

Based on the CAN Calibration Protocol (CCP), a specification by the ASAM association, PEAK-System has developed the programming interface PCAN-CCP API and now provides it free of charge. With this API, Windows applications (masters) can communicate with control units (slaves) via a CAN bus.

The programming interface is applicable for developments of 32-bit and 64-bit applications. The commands of the CCP specification are each mapped to one API function; further functions are used for communication management. The PCAN-CCP API utilizes the also freely available programming interface PCAN-Basic in order to access the CAN hardware from PEAK-System in the computer.

The Universal Measurement and Calibration Protocol XCP is implemented by the PCAN-XCP API. At this time its development is in Beta stage. Interested parties are invited to participate in the testing phase; they can apply under beta@peak-system.com.


Contact:
PEAK-System Technik GmbH
Otto-Roehm-Strasse 69
64293 Darmstadt
Germany

Phone: +49 (0)6151 8173-20
Fax:   +49 (0)6151 8173-29

E-mail: info@peak-system.com
Web: www.peak-system.com
