PCAN-Router Pro - Firmware version history

01.06.2015 - Version 1.14

Changes:

  • Number of transmit messages increased from 120 to 350
  • Number of data objects increased from 257 to 1272

Bug fix:

  • Number of data objects that were saved to EEPROM was limited to 127



31.03.2015 - Version 1.13

New features:

  • Multiplexer option for CAN variables added
  • Scale/Offset calculation order can be swapped for transmit messages (make it compatible to PCAN-Explorer behavior)



10.10.2014 - Version 1.12

  • Adjusted the Timing parameter for XMORE-CF-Cards

Bug fixes:

  • Timeout of Selfhold signal freezed the Router Pro
  • Fixed a problem with the Sleep-mode of the TH8056 transceiver (Single-wire)
  • Concerning "Routing x to y, ex..." CAN-IDs are now limited to 2047. It was possible to enter higher values but this leads to a system freeze
  • Trace Clear was deactivated completely



03.04.2013 - Version 1.9

Improved device resources: 

  • Receive messages quantity set from 50 to 120
  • Transmit messages quantity set from 50 to 120
  • Gateway messages quantity set from 50 to 120
  • Defaults quantity set from 50 to 500
  • Characteristic Curves quantity set from 10 to 20              

Bug fixes:

  • Enhanced error management concerning the CF card interaction
  • Trace Clear is now inactive by default 
  • Logging Error Frames is now inactive by default
  • Improved error management when the resources are exhausted

Please note: This version also includes the changes of revision 1.8.


07.12.2011 - Version 1.7

New configuration features:

  • Logging of error frames is now switchable for each CAN channel
  • Suppression of the configuration ID 7E7h is now switchable for each CAN channel

Bug Fix:

  • Function block "hysteresis" now has a 5.th parameter "start mode"

Attention: Both features require an update of the PPCAN-Editor hardware profile. This profile is delivered with the PPCAN-Editor from version 2.0.4

 


11.10.2011 - Version 1.6

Improvements:

  • Logging of CAN error frames. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0
  • Number of logging sessions is no longer limited to 16. Attention: This feature requires a PEAK-Converter (PCAN-Trace Converter) from version 1.9.0

Bug fix:

  • Warning when exceeding hardware's resource limits. Attention: this feature requires a PPCAN-Editor 2 from version 2.0.3

 


19.05.2011 - Version 1.5

  • Bug fix: Erroneous configuration may permanently block the device
  • Added: "Route X to Y, all" can now be switched during runtime
  • Changed device's resources: 
    • Characteristic Curves quantity set from  2 to 10 
    • Function Blocks quantity set from 50 to 120

 


18.10.2010 - Version 1.4

  • Bug fix: Code incomplete for CAN channel 5 (CF card) (incl. extension of PEAK-Converter to 16 channels)
  • Bug fix: Error when writing to EEPROM beyond 64 MB
  • Changed device's resources:
    • Receive messages quantity set from 35 to 50
    • Transmit messages quantity set from 35 to 50
    • Limits set from 10 to 5
    • Strings set from 5 to 2

 


10.06.2010 - Version 1.3

  • Added listen-only mode

 


20.04.2010 - Version 1.2

  • Various bug fixes
  • First official release

 


25.03.2010 - Version 1.1

  • Added new functions: real-time clock, beeper, and TJA1041 support

 


Version 1.0          

  • Prototype release