PCAN-Gateway Software & Configuration Website - Version History

2017-04-18 - PCAN-Gateway software version 2.6.0 -
Released with configuration website version 1.9.0

Improvements:

  • CAN traffic isn’t required to reconnect outgoing TCP routes anymore. Reconnection attempts are forced after a defined delay
  • Improved the display of the route status. The information how many devices are connected to a receive route is now processed. If more than one is connected, a red LED is shown. The route would not work correctly in this case
  • TCP Delay, a property of Send routes is now indicated on the manage routes web page. It is displayed in Expert mode by default and in Normal mode only if it differs from its default value (active)
  • TCP Delay can be deactivated for Send routes in Expert mode
  • New file format of .ini (1.3.1) file where the new delay can be defined per route as "Cdm"
  • The port 45321 is reserved for the transmission of status information and is required perform the handshake between PCAN-Gateways. This information was added to the documentation and the port is now checked for this value when adding or editing a route
  • Improved the listing of filters for the pages Add Route and Edit Route. The filter term and the user notes, if available, are now displayed as well
  • Improved the listing of the CAN channels at the Add and Edit Route page. In addition to the channel number, the bit rate and user notes are displayed
  • User notes for routes with a max 125 characters are now available. You can enter them while creating or editing a route
  • User notes of routes are displayed at the page Manage Routes if they are defined
  • Info icons were added in the table rows on Manage Routes and Manage Filters. They appear if the route or filter has user notes. Hover the icon to display them as a tooltip

Changes:

  • The default operation mode will be Micro Access Point in the future because Windows doesn’t support the connection to Ad-Hoc networks since version 8.1. Information about this has beed added to the documentation as well
  • Manage Routes: Revision of the information displayed for each Route in Expert mode
  • If the character # is used for the SSID or Netkey it causes an error because that character isn’t allowed for this
  • Device > User Management: Also network interfaces that are not available are now listet in the Public Dashboard configuration. This change is required for coming features

Bug fixes:

  • Tooltips of checkboxes and radio buttons were not displayed
  • Bug fixes and improvements of the mobile presentation and the page presentation with deactivated JavaScript
  • Fixed a problem conecerning the usage of DHCP
  • Minor bug fixes and changes


2015-08-11 - PCAN-Gateway software version 2.5.1 -
Released with configuration website version 1.7.1

Improvements:

  • Range validation for the WLAN encryption key

Changes:

  • Revision of the layout of the WLAN web page to enhance its usability
  • The broadcast scan duration was set to 10 seconds
  • Changed the time to change the IP address for WLAN devices to 15 sec

Bug fixes:

  • Only WLAN devices: The IP address could not be changed when running the µAP operation mode
  • It was possible to create 8 routes but the last one was deleted after a reboot
  • The user name at the login page can now be saved by the browser
  • Various minor bug fixes and updates concerning layout and text

 


2015-06-12 - PCAN-Gateway software version 2.5.0 -
Released with configuration website version 1.7.0

Please note: This Version includes all the changes since website version 1.5.0.

Improvements:

  • Added the section Filters. The top level page shows general information about filters
  • Added the common filter information at the Status and the Login page. The visibility at the Login page can be disabled
  • Added the page Manage Filters. The existing filters are listed with their basic information and control options
  • Added the page Add Filter. This page is used to add or edit a Range or Mask filter
  • Added a new step for creating Send routes. With the Filter step, you can attach or detach a filter to a route. Multiple in Expert mode
  • Multiple Filters can be joined by logical AND or logical OR
  • Attached filters are now shown on the page Manage Routes
  • The new WLAN operation mode µAP is now available. But please note: The Network Scan function is not available while running this mode
  • The INI file format has changed to version 1.3 and includes the final Filter parameters now
  • Enhanced performance for page loading

Changes:

  • The way Range filters work has changed. They are now made of multiple Mask filters and cover the defined range exactly
  • Due to the new INI format the designation of the filter parameters has changed. Old configurations will be updated but filters that were created with the new version will get lost when downgrading to an old software package
  • Overlapping filters should now work without any problems
  • Routes as well as filters are now shown with their index. This is a unique identification number
  • Manages Routes shows detailed information in normal user mode as well
  • The WLAN operation mode is now shown in the general information box
  • More detailed CAN state description texts
  • Revision of the checkbox and radio button design
  • Various layout changes to make the information more readable and accessible
  • Updated the website documentation including
  • Added a new help page for the new Filters section
  • Help buttons won't open the help in pop-ups anymore because this caused display problems on mobile devices and some further problems. The page will now be opened in a common tap

Bug fixes:

  • Revision layout for enhanced browser and mobile device support
  • Various minor bug fixes

 


2015-03-17 - PCAN-Gateway software version 2.4.2

Only changes for the software version concerning the
PCAN-Wireless Gateway and PCAN-Wireless Gateway DR.

  • Bug fix: In rare cases WLAN packets could get corrupted or lost

 


2014-07-25 - PCAN-Gateway software version 2.4.0 -
Released with configuration website version 1.5.0

On the page Network >> WLAN:

  • Added a new form to select the WLAN operation mode. After the first configuration Infrastructure mode (connect as a Client) was active by default. With the new form you can switch back to the Ad-Hoc mode (provide a network as a Host) or keep it active after the initialization
  • The encryption type WEP is no longer available due to security issues

General Improvements:

  • Help pages were added. You can access them via the new main menu entry "Help" or via the question mark icon on the other pages. You can open the corresponding help page in that case
  • The web design of version 1.4 of the configuration website was improved. A flexible layout and advanced tooltips were implemented for usage on mobile devices

Bug fixes:

  • User defined Subnet masks are now processed correctly. They were replaced by a default Subnet mask in previous versions
  • Sub-page titles are now displayed correctly

 


2014-04-01 - PCAN-Gateway software version 2.3.13 -
Released with configuration website version 1.3.1

On the page Network >> CAN (in Expert user mode):

  • CAN channels can now be activated and deactivated
  • Custom bit rates can now be defined. This comes along with a live validation of the entered values and a pre calculation of the resulting bit rate
  • Extensive information about the current configuration is displayed for each CAN channel

Improvements:

  • On the page Network >> CAN: The bit rate selection only offers values depending on the limits of the CAN transceiver
  • On the pages Device >> Software Update and Device >> Configuration the file upload buttons are now disabled as long as no file is selected
  • Minor adjustments for mobile web layout

 


2014-01-27 - Configuration website version 1.2.0

Adjustments for the PCAN-Wireless Gateways that were released with this version ...

  • Added the Auto Power Off function on the page Device >> Configuration

Changes:

  • Added new product pictures for the whole PCAN-Gateway product family
  • On the page Network >> CAN: For each CAN channel the setting manual bit rate is now displayed in Expert user mode

Bug fixes:

  • A incorrect error message was displayed if the user session was lost after a reset

 


2013-12-16 - Configuration website version 1.1.0

Adjustments for the PCAN-Wireless Gateways DR that were released with this version ...

  • Added a new page: Network >> WLAN Networks Scan that shows all available WLAN networks with name (SSID), encryption, and signal level. A single network can be selected for connecting your device. For this, the information is transferred to the WLAN configuration web page
  • All encryption types (including WEP as well as no encryption) can now be selected on the WLAN configuration page
  • A warning box is displayed on the bottom of the navigation if an unsecure encryption is used for the WLAN connection
  • WLAN region codes (USA, Canada, EU, and Japan) can be set

Chances:

  • The reboot time was increased to 40 to make sure that the device is ready for new requests
  • Drop Downs have a highlight if they get the focus (via the Tab button for example)

Bug fixes:

  • Login credentials with HTML special characters caused problems
  • On the page Routes >> Add Route and Routes >> Edit Route the selection IP Address Source also appeared after a Broadcast Scan where no other PCAN-Gateways were discovered
  • Minor text and bug fixes